Automatic Generation Of Intelligent Fixed Labels - Studer Vista 9 Operating Instructions Manual

4.4.2.16

Automatic Generation of intelligent Fixed labels

Mic input 2 (out of 4) of Mic/Line In card 3 (slot 3)
inserted in Remote I/O Box 6 (slot 6), connected via MADI
to Hub 4 (COM port 4)
Audio is transferred over HD Link channel #26,
connected to DSP card#0
Date printed: 28.0.0
AES input 3 (out of 16) of I/O card 1
inserted in Hub 4 (COM port 4)
Audio is transferred over HD link channel #3,
connected to DSP card #0
Audio coming through the D21m I/O components is always reaching the
core over Studer's proprietary HD (high density) link. This link is present
between the local hub(s) and the DSP core. Each link may carry up to 96
audio channels. Instead of displaying these channel numbers in the general
patch, the software 3.4 is able to give more intelligent names to the input and
output ports shown in the general patch. You will then see frame numbers as
well as card types and channel numbers within each card. This generation is
automatically active whenever the D21m I/O system is present and the hub
SW V4.5
Vista 9 Digital Mixing System
Structure of Intelligent Fixed Labels:
I21 B 0 R4/6 Line In 1/5
I/O Frame
(H: Hub, R: Remote I/O Box)
DSP Card
HD Link Channel
Frame numbers represent double-width slot in
corresponding hub frame to which the MADI link
is connected (1...6).
Card numbers represent slot number of frame
into which the card is inserted.
Board and I/O
GC Operation 4-5