5.13.2
Applying mix Protection
Important Note When Mix Protection is enabled, Protection is applied to the Active Pass. All
Selecting Protection Sets How Protection Sets are selected is determined by selecting the desired radio
Date printed: 28.0.0
One or more Protection Sets may be applied simultaneously. This affords mul-
tiple layers of protection, which may be built up during the course of a mix.
These layers of protection may be quickly applied and removed as needed. If
a Title is being used as a production template, the saved Protection Sets may
be used with any Mix Pass created using that template.
protected controls will be protected regardless of which Mix Pass is made
active.
button in the 'Use' section of the 'Automation Protection' window.
These radio buttons allow the selection of Protection Sets one of three
ways:
• Current: The current Protection Set will be selected.
• Checked: The checked Protections Sets will be selected. A list of Protection
Sets is displayed in the Protection Set section of the Automation Protec-
tion window. Each Protection Set has a box which may be 'checked' to
include that set in the list of checked sets. The current Protection Set is
not selected.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-99