3.4.6
Bus Assignment View
Inverse Bus Interrogation Pressing VIEW: BUS ASN on a group master, an AUX master or a master chan-
Date printed: 27.0.0
When pressing VIEW: BUS ASN, the display changes to the bus assign window
of the channel selected with the LINK / SEL key.
Only buses are shown here to which the current channel can be assigned.
Pressing VIEW: BUS ASN on a master channel, however, will activate the
'inverse bus interrogation' view described below.
The CLR buttons will clear the assignment to all buses of the corresponding
type.
nel (having a bus routed to its input) opens the Strip Setup dialog on the GC
screen, showing the currently assigned channels in magenta color.
When pressing VIEW: BUS ASN on an N–X owner channel, the inverse bus
interrogation is done on the associated N–X bus.
SW V4.5
Vista 9 Digital Mixing System
Parameters 3-5