Generic And Label Display Area - Studer Vista 9 Operating Instructions Manual

3.3.12

Generic and Label Display Area

Date printed: 27.0.0
Channel label display: The top line always indicates the inherited label (corre-
sponds to the user label of the patched source – 'track sheet') of each channel.
The second line normally is set to user label display, but can be changed by
pressing GLOBAL VIEW: LABEL TYPE.
The channel type is indicated with colors in the label display; in addition, the
bottom right corner of the label field shows the channel type in writing, as
shown below.
Generic Displays, such as n–1, OVER (fader over-range), etc. are only shown
if active:
The numerical fader value is displayed in dB whenever the fader knob is
touched; it disappears a short while after the fader knob has been released.
The graphical display of snapshot preview value and current fader value pops
up over the right-hand part of the display area, showing the values as bar
graphs (current value in gray, snapshot preview value in pink).
SW V4.5
Vista 9 Digital Mixing System
Parameters 3-23