Snapshots/Presets - Studer Vista 9 Operating Instructions Manual

5.12.2

Snapshots/Presets

Recall Behavio­r T he Snapshot page does not have dedicated automation controls. The current
Date printed: 28.0.0
VMC Snapshots and Presets may be recalled while AutoTouch+ is in use.
The control values contained within Snapshots and Presets maybe applied
to the console while AutoTouch+ is in operation, but only for controls that
have been properly enabled. All Mix Pass 'Write To:' and 'Extend Back To:'
conditions apply.
Snapshot and Preset control values may be recalled and stored as Static values
by recalling the desired Snapshot/Preset without engaging Write or Trim en-
able. The Static values will be updated and saved the next time a Mix Pass is
written.
global automation modes apply when Snapshots or Presets are recalled. Any
preselector may be used to select global modes, depending on the controls/
functions the user wishes to enable.
Switches and Selectors recalled using Snapshots or Presets will follow the
rules of a Press and Release switch operation. Refer to chapter 5.10.3.1.
Since values are being applied to VMC controls, the affects of recalling Snap-
shots or Presets may auditioned.
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-9