Channel Selection; System Functions; System Functions: Protect/Unprotect Sysadmin Mode - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.5.3

Channel Selection

4.5.4

System Functions

4.5.4.1

System Functions: Protect/Unprotect SysAdmin Mode

4-9 GC Operation
This tool allows one console Channel to be selected for control of various
centralized functions on the Graphical Controller, such as Channel Patch.
There are three arrow buttons:
Selects the previous channel from the list;
Selects the next channel from the list;
Opens the full Channel List to select a channel. Labels are displayed according
to the selected Label Mode (refer to chapter 4.3.3).
This action allows the system user mode to be toggled from Standard to
System Administration. The System Administration mode allows access to
some system functions that are not needed in normal operation.
Accessing the System Administration mode can be accomplished in two
ways:
• Clicking the
• Selecting SysAdmin... in the User menu.
From Standard Mode (closed padlock icon): Click on the padlock icon, or
select SysAdmin... in the User menu. You will be asked to enter the System
Administration Password.
After complying with the request, an additional menu item – SysAdmin – will
appear in the menu bar.
From System Administration mode (open padlock icon): Click on the padlock
icon or select Protect in the User menu to exit this mode.
For more details on the User/Protect menu and the System Administration
menu, refer to chapters 4.6.5 and 4.7.
SW V4.5
padlock icon in the toolbar;
Date printed: 28.0.0