Sysadmin: Surveyor; Sysadmin: Show Vmc Tree - Studer Vista 9 Operating Instructions Manual

ON (Fader Value): Clicking on the Capture button will set the current fader value to be used
OFF (Fader Value): Clicking on the Capture button will set the current fader value to be used when
Speed OFF: Determines the time used for fading out the corresponding channel.
Activation: The fade actions may be activated by different events. Several events may
Fader Touch: Touch-and-release the fader in order to activate the fade.
User Key 1/2: The fade is activated when pressing the corresponding USER 1 or USER 2 key
4.7.3

SysAdmin: Surveyor

4.7.4

SysAdmin: Show VMC Tree

Show VMC Tree: This action will bring up the VMC tree View. This page will display a list of
Date printed: 28.0.0
when the GPI is active, hence the value used when the fader is opened.
Alternatively the value may be typed using the keyboard or by using the track-
ball: Click in the number field and drag the pointer up or down. This action
is similar to the way time values are adjusted in the dynamic automation of
the Vista consoles.
the GPI is inactive, hence the value used when the fader is lowered/closed.
Alternatively the value may be modified as described above.
Note: By using the same GPI on two channels and setting the ON value to the 'fader
closed' position on one of the two and vice versa allows using one GPI to
control opening and closing of different channels at the same time.
Speed ON: Determines the time used for fading in the corresponding channel.
be enabled at the same time. The fade will take place whenever one of the
activated events is detected:
GPI: Select one of the general-purpose inputs available on the console for trigger-
ing the fade.
Note: If the fader is moved while being touched, no automatic fade is being executed.
This prevents from accidental fading.
on each channel.
Note: In case adjusted values should constantly jump back to their previous values,
check that the C:\D950System\Sig...ini file is not write protected.
Surveyor: This action will open the Surveyor, a tool used for checking the status of the
Vista system. Refer to chapter 4.8.
This feature is primarily used in troubleshooting and typically is not used in
normal operation.
all channels, inputs, outputs, buses, and other system elements that are defined
within the current Session Configuration. Double-clicking on one of these
items will display the contents of that item's branch. Opening of subsequent
branches will take further and further inside the VMC tree. If the item has
a changeable parameter, such as EQ high frequency, that parameter may be
controlled directly from the VMC tree.
SW V4.5
Vista 9 Digital Mixing System
GC Operation 4-4