Mix Tree Click Functions - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.4.1.4

mix Tree Click Functions

Left-Click Functio­ns • Single-clicking a Mix Pass within the Mix Tree will 'mark' that pass by
Right-Click Functio­ns • Right-clicking within the Mix Tree will open the Mix Tree Menu. Only
5-0 AutoTouch+
A variety of 'click functions' are available within the Mix Tree. These
functions range from
highlighting it in red. Clicking a marked pass will 'unmark' it and remove
the red highlight. Only one mix at a time may be selected using this
method.
• Control-clicking (holding the Ctrl key and single-clicking) allows individ-
ual Mix Passes anywhere within the Mix Tree to be marked or unmarked.
Any combination of passes may be marked.
• Shift-clicking (holding the Shift key and single-clicking) two Mix Passes
allows these passes and those in-between to be marked or unmarked. The
passes must be within the same branch or root-branch of the Mix Tree.
In this way, multiple passes may be marked. More importantly, the link
history of these passes is maintained.
• Double-clicking a Mix Pass adds it to the top of the Mix Pass Stack and
makes it the Active Pass. The Active Pass will be highlighted in green in
the Mix Tree.
the items that don't pertain to individual passes or branches are shown.
• Right-clicking a Mix Pass within the Mix Tree will open the Mix Tree
Menu with all available items shown.
SW V4.5 Date printed: 28.0.0