Bridge Card Redundancy - Studer Vista 9 Operating Instructions Manual

SCore Live
2.2.1 Bridge Card redundancy
Single Bridge Card
8 SCore Live
Since Vista SW V4.1, a redundant Bridge card can be used in the SCoreLive.
This provides not only cable redundancy but also true bridge card redun-
dancy.
The order no. of the bridge card with this functionality is A943.0370.35 or
later; earlier bridge cards cannot be upgraded to this level.
Note When using a redundant bridge card, the SCoreLive's maximum capacity for
DSP cards is reduced from 9 to 8 cards.
VISTA 9
PC 1
LAN 1
IP: 192.168.1.128
IP: 192.168.3.128
SUBN: 255.255.255.0
LAN 2
IP: 192.168.2.128
IP: 192.168.4.128
SUBN: 255.255.255.0
Switch 1
SCore Live
BRIDGE 1
IP Port 1 192.168.1.60
IP Port 2 192.168.2.60
SUBN: 255.255.255.0
In the example above, the single bridge card must be installed in slot 10 of
the SCoreLive frame; the maximum number of DSP cards is 9.
PC 2
LAN 1
IP: 192.168.1.129
IP: 192.168.4.129
SUBN: 255.255.255.0
LAN 2
IP: 192.168.2.129
IP: 192.168.3.129
SUBN: 255.255.255.0
Switch 2
Date printed: 28.0.0