Automation Keys On The Channel Strips - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
5.1.3

Automation Keys on the Channel Strips

PUNCH-IN/OUT Four keys are representing the recording state of its member objects:
AUTO MODE (ISO) Toggles between different automation modes: READ, WRITE, TRIM, ISO-
5-8 AutoTouch+
SWIT REC (USR 1) - for keys ('switches')
KNOB REC (USR 2) - for rotary encoders ('knobs')
MUTE REC (L2) - for mutes
FDR REC (TALK) - for faders
LATE. As a standard, only the objects selected in the 'preselector area' of the
AutoTouch+ panel (e.g. FADER) are toggled, but not the whole channel.
This key has also the important function to suppress the detection of a physical
touch or un-touch of any objects. It is therefore possible to modify a value
without putting the object into 'held' mode. Or – vice versa – it is possible
to physically un-touch an object while that the automation doesn't detect the
un-touch (object is still considered as 'held'). For this reason the AUTO MODE
(ISO) key is sometimes also referred to as 'modifier key'.
SW V4.5 Date printed: 28.0.0