Sorting Options; How To View The Different Label Types - Studer Vista 9 Operating Instructions Manual

Vista 9 Digital Mixing System
4.4.2.5.1

Sorting Options

Sort by Fixed Label: Independent of the User Label, the Sources and Targets will be sorted and
Sort by User Label: The Sources and Targets will be sorted and displayed in alphabetical order,
4.4.2.5.2

How to View the Different Label Types

4-28 GC Operation
There is a number of options for sorting the display of the Sources and Targets
in the General Patch Lists. This sorting is independent of which label type is
being displayed due to the global label mode selection.
displayed in alphabetical order, depending on the Fixed Label of the Sour-
ces/Targets.
depending on the User Labels of the Sources/Targets.
To select the sorting method, check the 'Fixed Label' or 'User Label' option
button as shown below:
If the 'Use Subclasses' checkbox is selected, then the 'Digital Input' Source
List and 'Digital Output' Target List will be sorted and grouped by the defined
subclasses. This selection has highest priority of sorting.
 Tip The most useful sorting method is to Sort by 'Fixed Label' and 'Use Sub-
classes'.
It is typical that a user will work in a single mode of label type display within
the GC. There are times, however, when it is useful to temporarily display
another of the label types globally within the GC to help with patching. The
Label mode is changed by clicking on the 'Label' button in the system tool-
bar:
Clicking this button will toggle the label view globally throughout all parts
of the GC. The label display can be toggled between 'User', 'Inherited'
and 'Fixed'. For a detailed description of how to work best with labels, see
below.
SW V4.5 Date printed: 28.0.0