Panning Parameters For 5.1 Surround Channels - Studer Vista 9 Operating Instructions Manual

3.4.3.5

Panning Parameters for 5.1 surround Channels

General PAN on/off is selected with the PAN hardware key above the Vistonics
CenT LeVeL Center level control from MUTE (i.e. –∞ dB) to +10 dB.
FRonT L-R Front panning between the left, (center) and right channels in 1° steps. The
ReaR L-R Panning between the left and right surround channels in 1° steps.
PanaRnD on/off Activates the Pan-Around function.
PanaRnD Single-knob function, allows rotating the surround sound field by ±180°.
LFe on/off On/off selector for LFE channel use.
LFe LeVeL LFE channel percentage control; 0% = no LFE channel use, 100% = LFE
Date printed: 27.0.0
Touch the yellow Vistonics
FB on/off On/off switch for center channel contribution to the F-R control.
contribution to the center channel is determined by the CENTER control.
F-R This parameter allows variable blending from front to rear channels in 60
increments, either with a contribution from the center channel (FB On) or
without (FB Off).
channel fully active.
SW V4.5
Vista 9 Digital Mixing System
pan field.
™
section.
™
Parameters 3-43