Desk Operation - Studer Vista 9 Operating Instructions Manual

2

DEsk OPERATiOn

Fader Bay 1
Date printed: 27.0.0
Fader Bay 2
The desk consists of two types of bays: Up to seven identical fader bays and
exactly one control bay. The fader bays contain the console channel strips
with rotary controls, faders, keys, and meters. Ten strips are located next to
each other in one bay. They are not dedicated to any DSP channel.
If a fader bay should fail to operate, the others will continue working. In such
a case, access to all channels is provided nevertheless thanks to the Vista desk
scrolling feature.
GC Screen The TFT screen displaying the Graphical Controller application (GC) is not
an integral part of the console. It is therefore possible to connect any 3
TFT screen with a DVI input to the console. In order to provide power to
this external screen, a mains outlet is provided at the rear as well as in the
connection area on the front of the console. These outlets are under power
whenever the control system is powered up; they are automatically set to the
same voltage as the mains voltage provided to the console.
SW V4.5
Vista 9 Digital Mixing System
Control Bay 1 Fader Bay 3...
rd -party
Desk Operation 2-