Mix Pass Stack - Studer Vista 9 Operating Instructions Manual

5.5.1

mix Pass Stack

Organizatio­n The eight positions of the Mix Pass Stack are represented by eight Mix Pass
Adding a Pass to­ the Stack Mix Passes are added to the Mix Pass Stack in the following ways:
Active Mix Pass The 'Active Mix Pass' is the one played back and will be the basis for a new
Selecting an Active Mix Pass The Active Mix Pass is selected from the Mix Pass Stack in one of three
Date printed: 28.0.0
There is an eight-position Mix Pass Stack which holds up to eight Mix Passes
in memory for immediate use. Mix Passes can only be played back from the
Mix Pass Stack. The Mix Pass Stack is located on the AutoTouch+ window
on the GC.
boxes arranged horizontally. The number of the Mix Pass will appear within
the Mix Stack position (box) in which it is stored. A Mix Pass can appear
only once within the Mix Pass Stack.
The box the furthest to the right is the position where Mix Passes are added to
the stack. As Mix Passes are added, any existing passes shift to the left. When
the Mix Pass Stack is full and a new pass is added, the Mix Pass in the last
position (far left position) will be deleted from the stack as one to its right is
shifted down.
In the example above, only three Mix Passes are loaded into the Mix Pass
Stack and the #5 pass is Active.
• Creating a new Mix Pass: The newly created Mix Pass will be added to
the top of the Mix Pass Stack and becomes active. See 'Creating a New
Mix Pass' above.
• Double-clicking a Mix Pass in the Mix Tree: The selected Mix Pass will
be added to the top of the Mix Pass Stack and becomes active.
• Right-clicking a Mix Pass in the Mix Tree: The Mix Tree Right Click menu
will open. Selecting 'Set As Read Mix' will cause the selected Mix Pass
to be added to the top of the Mix Pass Stack and become active.
Mix Pass if any changes are made. It contains the 'Read Mix Data' that is
used as new passes are created. The Active Mix Pass is indicated by a green
light above the active position and the box containing the pass number is
highlighted.
The Active Mix Pass may also be referred to as the Active Pass or Read Mix
Pass.
ways:
• Clicking a Mix Pass in the Mix Pass Stack: That Mix Pass will become
active.
• Double-clicking a Mix Pass in the Mix Tree: If that Mix Pass is already in
the Mix Pass Stack it will become active. If it is not already in the stack,
the selected Mix Pass will be added to the top of the Mix Pass Stack and
SW V4.5
Vista 9 Digital Mixing System
AutoTouch+ 5-5