Honda 2004 Odyssey Service Manual page 1969

Power Sliding Doors
Self-diagnosis Procedure
Reading the DTC
When the power sliding door indicator light stays on with the ignition switch ON (II) and with the power sliding door
master switch ON, read the DTC using the following method:
1. With the ignition switch OFF, turn the power sliding door main switch ON.
2. Turn the ignition switch ON (II).
3. Watch the power sliding door indicator light.
• If the light comes on for 2 seconds and then goes off, there is an intermittent problem. Erase the DTC(s), do the
re-homing procedure, and recheck the system.
• If the light stays on, go to step 4.
4. Turn the main switch OFF.
5. Press and hold the open or close button of the door that is not working.
6. While still holding the button, turn on the main switch for one second, and then turn the main switch OFF.
7. One second after you turn off the main switch, release the open or close button. The indicator light will begin to
flash DTC(s) in the order they were set.
Examples of DTC Indications
No System Problem
If there is no DTC stored, the indicator will come on for 3 seconds and then go off.
22-290
ON
OFF
3 sec