Enable Source Mac Filtering - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Content Filtering.
The Blocked Sites screen displays.
7. In the Apply Keyword Blocking to section, select the check boxes for the groups to which
you want to apply keyword blocking or click the Select All button to select all groups.
Note: If you changed the LAN group names (see
the Network Database
the Block Sites screen.
8. Activate or deactivate keyword blocking for the selected groups:
• Activate. Click the Enable button.
Keyword blocking is activated for the selected groups.
• Decativate. Click the Disable button.
Keyword blocking is deactivated for the selected groups.

Enable Source MAC Filtering

You can permit or block traffic from certain known computers or devices.
By default, the source MAC address filter is disabled. All the traffic received from computers
with any MAC address is allowed. When you enable the source MAC address filter,
depending on the selected policy, traffic is either permitted or blocked if it comes from any
computers or devices whose MAC addresses are listed in MAC Addresses table.
Note: For additional ways of restricting outbound traffic, see
Rules — Service Blocking
Change Group Names in
on page 139), the new names are displayed on
on page 212.
Protect Your Network
312
Outbound