NETGEAR ProSafe FVS336Gv2 Reference Manual page 113

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. In the IPv6 WAN Settings table, click the Edit button for the WAN interface that you
selected as the primary WAN interface.
The WAN IPv6 ISP Settings screen displays.
9. Click the Advanced option arrow in the upper right.
The WAN IPv6 Advanced Settings screen displays for the WAN interface that you
selected.
10. Enter the settings as described in the following table.
Setting Description
Ping IP Address The IP address of the interface that must receive the ping request. The interface must
not reject the ping request and must not consider ping traffic to be abusive.
Note:
interval and number of failover attempts determine how quickly the VPN firewall
switches from the primary link to the backup link if the primary link fails, or when the
primary link comes back up, switches back from the backup link to the primary link.
Retry Interval Is The retry interval in seconds. A ping is sent after every retry interval. The default retry
interval is 30 seconds.
Failover After The number of failover attempts. The primary WAN interface is considered down after
the specified number of queries fails to elicit a reply. The backup interface is brought
up after this situation occurs. The failover default is 4 failures.
Note: The default time to roll over after the primary WAN interface fails is
two minutes. The minimum test period is 30 seconds, and the
minimum number of tests is 2.
11. Click the Apply button.
Your settings are saved.
Pings are sent through the WAN interface that is being monitored. The retry
Configure the IPv6 Internet and WAN Settings
113