View The Active Pptp Users And Disconnect Active Users - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

View the Active PPTP Users and Disconnect Active Users

The following procedure describes how to view all active PPTP users and disconnect active
PPTP users.

To view all active PPTP users and disconnect active PPTP users:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > Connection Status > PPTP Active Users.
The PPTP Active Users screen displays. The following figure does not show any active
users.
The List of PPTP Active Users table lists each active connection with the information that
is described in the following table.
Item
Username
Remote IP
Description
The name of the PPTP user that you defined (see
page 498).
The remote client's IP address.
Set Up Virtual Private Networking With IPSec Connections
Manage User Accounts
420
on