NETGEAR ProSafe FVS336Gv2 Reference Manual page 376

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Authentication Type
Username
Password
10. Click the Apply button.
Your settings are saved. The IKE policy is added to the List of IKE Policies table.
Associate a Manually added IKE policy with an Existing VPN Policy
The following procedure describes you can add an IKE policy that you added manually with
an existing VPN policy. An IKE policy that is not associated with a VPN policy is inactive.

To associate a manually added IKE policy with an existing VPN policy:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > IPSec VPN > VPN Policies.
Description
If you select Edge Device from the AUTH Configuration menu, you must select
an authentication type from the Authentication Type menu:
• User Database. XAUTH occurs through the VPN firewall's user database. For
information about adding users, see
• Radius PAP. XAUTH occurs through RADIUS Password Authentication
Protocol (PAP). The local user database is first checked. If the user account is
not present in the local user database, the VPN firewall connects to a
RADIUS server. For more information, see
the VPN Firewall's RADIUS Client
• Radius CHAP. XAUTH occurs through RADIUS Challenge Handshake
Authentication Protocol (CHAP). For more information, see
RADIUS Servers for the VPN Firewall's RADIUS Client
The user name for XAUTH.
The password for XAUTH.
Set Up Virtual Private Networking With IPSec Connections
Manage User Accounts
Configure the RADIUS Servers for
on page 392.
374
on page 498.
Configure the
on page 392.