NETGEAR ProSafe FVS336Gv2 Reference Manual page 259

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. In the WAN IPv4 Settings table, click the Edit button for the WAN interface for which you
want to add a secondary WAN address.
The WAN IPv4 ISP Settings screen displays.
8. Click the Secondary Addresses option arrow in the upper right.
The WAN Secondary Addresses screen displays for the WAN interface that you selected.
9. In the Add WAN Secondary Addresses section, enter the following settings:
• IP Address. Enter the secondary address that you want to assign to the WAN port.
• Subnet Mask. Enter the subnet mask for the secondary IP address.
10. Click the Add button.
The secondary IP address is added to the List of Secondary WAN addresses table.
11. Select Security > Firewall.
The Firewall submenu tabs display with the LAN WAN Rules screen in view, displaying
the IPv4 settings.
12. Under the Inbound Services table, click the Add button.
The Add LAN WAN Inbound Service screen for IPv4 displays.
Customize Firewall Protection
258