NETGEAR ProSafe FVS336Gv2 Reference Manual page 671

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Table 51. VPN firewall factory default configuration settings (continued)
Feature
Firewall and security settings
Inbound LAN WAN rules (communications coming in from
the Internet)
Outbound LAN WAN rules (communications from the LAN
to the Internet)
Inbound and outbound DMZ WAN rules
Inbound and outbound LAN DMZ rules
Respond to ping on WAN (Internet) ports
Stealth mode
TCP flood
UDP flood
Respond to ping on LAN ports
IPv4 VPN pass-through for IPSec in NAT mode
IPv4 VPN pass-through for PPTP in NAT mode
IPv4 VPN pass-through for L2TP in NAT mode
IPv6 VPN pass-through for IPSec
Multicast pass-through for IGMP
Session limits
TCP time-out
UDP time-out
ICMP time-out
SIP ALG
Source MAC filtering
IP/MAC bindings
Port triggering rules
UPnP
Bandwidth profiles
QoS profiles (for IPv4 firewall rules)
Default Settings and Technical Specifications
669
Default Behavior
All traffic is blocked, except for traffic
in response to requests from the LAN.
All traffic is allowed.
None
None
Disabled
Enabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
1200 seconds
180 seconds
Eight seconds
Disabled
Disabled
Disabled
None
Disabled
None
None