Disable The Broadcast Of Arp Packets For The Default Vlan - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. From the MAC Address for VLANs menu, select Unique.
The default setting is Same.
9. Click the Apply button.
Your settings are saved. VLANs have unique MAC addresses.
Note: If you attempt to configure more than 16 VLANs, the MAC addresses
that are assigned to each VLAN might no longer be distinct.

Disable the Broadcast of ARP Packets for the Default VLAN

You can disable the broadcast of Address Resolution Protocol (ARP) packets for the default
VLAN. If the broadcast of ARP packets is enabled, IP addresses can be mapped to physical
addresses (that is, MAC addresses). By default, the broadcast of ARP packets is enabled for
the default VLAN.

To disable the broadcast of ARP packets for the default VLAN:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Configure the IPv4 LAN Settings
127