NETGEAR ProSafe FVS336Gv2 Reference Manual page 46

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting Description
Idle Timeout Select a connection method radio button:
•
•
My IP Address The IP address assigned by the ISP to make the connection with the ISP server.
Server IP Address The IP address of the PPTP server.
12. Locate the Internet (IP) Address section.
13. Configure the IP address settings as described in the following table.
Setting
Select an IP address radio button:
• Get Dynamically from ISP. Select this radio button if your ISP has not assigned you a static IP
address. The ISP automatically assigns an IP address to the VPN firewall using the DHCP network
protocol.
• Use Static IP Address. Select this radio button if your ISP assigned you a static (fixed or permanent)
IP address. Enter the IP address and subnet mask.
IP Address
IP Subnet Mask
14. Locate the Domain Name Server (DNS) Servers section.
Keep Connected. Select this radio button to keep the connection always on.
Idle Timeout. Select this radio button to log out after the connection is idle for a
period. In the Idle Timeout field, enter the number of minutes to wait before
disconnecting. This method is useful if your ISP charges you based on the period
that you have logged in.
Description
The static IP address assigned to you. This address identifies the VPN firewall to
your ISP.
The subnet mask is usually provided by your ISP.
Configure the IPv4 Internet and WAN Settings
46