NETGEAR ProSafe FVS336Gv2 Reference Manual page 565

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
10. Enter the settings as described in the following table.
Setting
Add LAN Traffic Meter Account
LAN IP Address
Direction
Limit
Traffic Counter
Restart Traffic
Counter
Send e-mail report
before restarting
counter
When Limit is reached
Block Traffic
11. Click the Apply button.
Description
The LAN IP address for the account.
From the Direction menu, select the direction of the traffic that is measured:
• Inbound traffic. Restrictions are applied to incoming traffic when the traffic limit
is reached.
• Both directions. Restrictions are applied to both incoming and outgoing traffic
when the traffic limit is reached.
Enter the monthly traffic volume limit in MB. The default setting is 0 MB. The
maximum limit that you can enter is 256,000 MB.
Select when the traffic counter restarts:
• Restart Traffic Counter Now. The traffic counter restarts immediately after you
click the Apply button.
• Restart Traffic Counter at a Specific Time. Restart the traffic counter at a
specific time and day of the month. Complete the time fields and select the
meridiem and day of the month from the menu.
An email report is sent immediately before the counter restarts. Ensure that emailing
of logs is enabled (see Enable and Schedule Emailing of Logs
Select what action the VPN firewall performs when the traffic limit is reached:
• Block. All incoming and outgoing Internet and email traffic is blocked.
• Send Email Alert and Block. An email alert is sent when all incoming and
outgoing Internet and email traffic is blocked. Ensure that emailing of logs is
enabled (see Enable and Schedule Emailing of Logs
Monitor System Access and Performance
563
on page 569).
on page 569).