Configuring Source Mac Filtering - NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit Firewall Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
4. Select any Web Components you wish to block and click Apply.
5. Select the groups to which keyword blocking will apply, then click Enable to activate
keyword blocking (or disable to deactivate keyword blocking).
6. Enter your list of blocked keywords or domain names in the Blocked Keyword fields. After
each entry, click Add. The keyword or domain name will be added to the Blocked Keywords
table. (You can also edit an entry by clicking Edit in the Action column adjacent to the entry.)
7. In the Add Trusted Domain section of the screen, enter the name(s) of any domain for which
the keyword filtering will be bypassed and click Add. The trusted domain will appear in the
Trusted Domains table and will be exempt from filtering.

Configuring Source MAC Filtering

Source MAC filtering will drop or allow the Internet-bound traffic received from PCs with
specified MAC addresses.
• By default, the source MAC address filter is disabled. Traffic received from any MAC address
is allowed.
• When the source MAC address filter is enabled, outbound Internet traffic will be filtered using
the MAC Addresses table on this screen. You can choose to block MAC addresses in the table
or to allow only those addresses in the table.
Note: For additional ways of restricting outbound traffic, see
(Service Blocking)" on page 4-3
To enable MAC filtering and add MAC addresses to be blocked:
1. Select Security > Address Filter from the menu.
2. Select the Source MAC Filter tab to display the Source MAC Filter screen (see
on page 4-29).
4-28 Firewall Protection and Content Filtering
v1.0, January 2010
"Outbound Rules
Figure 4-17