NETGEAR ProSafe FVS336Gv2 Reference Manual page 121

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Note: For information about how to manage VLANs, see
on page 116.
The following sections provide information about managing VLAN profiles:
• Add a VLAN Profile
• Change a VLAN Profile
• Enable, Disable, or Delete Existing VLAN Profiles
Add a VLAN Profile
The following procedure describes how to add a VLAN profile with an IP address, associate
ports with the VLAN profile, and configure optional settings such as DHCP settings, a DNS
proxy, and inter-VLAN routing.

To add a VLAN profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4
settings. The following figure contains some VLAN profiles as an example.
Configure the IPv4 LAN Settings
120
Port-Based VLANs