NETGEAR ProSafe FVS336Gv2 Reference Manual page 304

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Bandwidth Profiles.
The Bandwidth Profiles screen displays.
7. In the List of Bandwidth Profiles table, click the Edit button for the bandwidth profile that you
want to change.
The Edit Bandwidth Profile screen displays.
8. Change the settings.
For information about the settings, see
9. Click the Apply button.
Your settings are saved. The modified bandwidth profile displays in the List of Bandwidth
Profiles table on the Bandwidth Profiles screen.
Remove One or More Bandwidth Profiles
The following procedure describes how to remove one or more bandwidth profiles that you
no longer need as objects for firewall rules.

To remove one or more bandwidth profiles:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
Add and Enable a Bandwidth Profile
Customize Firewall Protection
303
on page 300.