Add A Priority Queue Wan Qos Profile - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Add a Priority Queue WAN QoS Profile

The following procedure describes how to add a priority queue QoS profile for a WAN
interface.

To add a priority queue WAN QoS profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > QoS.
The QoS screen displays.
7. Under the List of QoS Profiles table, click the Add button.
The Add QoS screen displays. The following figure shows settings for a priority QoS
profile.
Configure the IPv4 Internet and WAN Settings
78