NETGEAR ProSafe FVS336Gv2 Reference Manual page 227

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The following table lists the menus that apply to an IPv4 LAN WAN outbound rule.
Menus that apply to all IPv4 LAN WAN outbound
rules
Service
Action
LAN Users
WAN Users
Log
9. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
LAN WAN Rules screen.
Add an IPv6 LAN WAN Outbound Rule
The following procedure describes how to add an IPv6 LAN WAN outbound rule.

To add an IPv6 LAN WAN outbound rule:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Firewall.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
QoS Profile
Bandwidth Profile
NAT IP
Note:
mode is NAT.
Customize Firewall Protection
226
This menu is available only when the selection
This menu is available only when the WAN