NETGEAR ProSafe FVS336Gv2 Reference Manual page 135

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• Remove One or More Devices from the Network Database
View or Add Devices Manually to the Network Database
The following procedure describes how to view or add devices manually to the network
database.

To view or add devices manually to the network database:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings > LAN Groups.
The LAN Groups screen displays. The following figure shows some manually added
devices in the Known PCs and Devices table as an example.
Configure the IPv4 LAN Settings
134