NETGEAR ProSafe FVS336Gv2 Reference Manual page 96

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Note: If you do not know your static IPv6 address information, contact your
IPv6 ISP.
Setting
IPv6 Address
IPv6 Prefix Length
Default IPv6 Gateway
Primary DNS Server
Secondary DNS Server The IPv6 IP address of the ISP's secondary DNS server.
11. Click the Apply button.
Your settings are saved.
12. Verify the connection:
a. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
b. In the upper right, select the IPv6 radio button.
The WAN Setup screen displays the IPv6 settings (see the figure that is shown in
Step 7).
c. In the IPv6 WAN Settings table, click the Status button for the WAN interface for
which you want to display the connection status.
The Connection Status pop-up screen displays. The following figure shows a static IP
address configuration. The IP addresses that are shown in this figure are not related
to any other examples in this manual.
Description
The IP address that your ISP assigned to you. Enter the address in one of the
following formats (all four examples specify the same IPv6 address):
• 2001:db8:0000:0000:020f:24ff:febf:dbcb
• 2001:db8:0:0:20f:24ff:febf:dbcb
• 2001:db8::20f:24ff:febf:dbcb
• 2001:db8:0:0:20f:24ff:128.141.49.32
The prefix length that your ISP assigned to you, typically 64.
The IPv6 IP address of the ISP's default IPv6 gateway.
The IPv6 IP address of the ISP's primary DNS server.
Configure the IPv6 Internet and WAN Settings
96