NETGEAR ProSafe FVS336Gv2 Reference Manual page 193

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Router Preference Select the VPN firewall's preference in relation to other hosts and routers in the DMZ:
MTU
Router Lifetime
10. Click the Apply button.
Your settings are saved.
Add an Advertisement Prefix for the DMZ
You must configure the prefixes that are advertised in the DMZ router advertisements (RAs).
For a 6to4 address, you must specify only the site level aggregation identifier (SLA ID) and
the prefix lifetime. For a global, local, or ISATAP address, you must specify the prefix, prefix
length, and prefix lifetime.

To add an advertisement prefix for the DMZ:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
Description
• Low. The VPN firewall is treated as a nonpreferred router in the DMZ.
• Medium. The VPN firewall is treated as a neutral router in the DMZ.
• High. The VPN firewall is treated as a preferred router in the DMZ.
The maximum transmission unit (MTU) size for a packet in one transmission over a
link. The default setting is 1500.
The router lifetime specifies how long the default route that was created as a result of
the router advertisement must remain valid.
Enter the router lifetime in seconds. This is the period that the advertised prefixes are
valid for route determination. The default period is 3600 seconds (one hour). The
minimum value is 30 seconds; the maximum value is 9000 seconds.
Configure the IPv6 LAN Settings
192