Define A Schedule - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Define a Schedule

Schedules define the time frames under which firewall rules are applied. Three schedules,
Schedule 1, Schedule 2, and Schedule 3, can be defined, and you can select any one of
these when defining firewall rules.
Other than the tab that you click to specify the schedule that you want to configure, the procedure
to define Schedule 2 and Schedule 3 is identical to the procedure to define Schedule 1.

To define Schedule 1:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Services > Schedule 1.
The Schedule1 screen displays.
Customize Firewall Protection
292