NETGEAR ProSafe FVS336Gv2 Reference Manual page 323

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Note: You must specify only once whether you want IP/MAC binding
violations for IPv6 traffic to be logged and emailed. Your selection
applies to all IPv6 IP/MAC bindings.
9. Click the Apply button.
Your settings are saved.
10. In the IP/MAC Bindings section, enter the settings as described in the following table.
Setting
Name
MAC Address
IP Address
Log Dropped
Packets
11. Click the Add button.
The new IP/MAC rule is added to the IP/MAC Bindings table.
Change an IPv6/MAC Binding
The following procedure describes how to change an existing binding between a MAC
address and an IPv6 address.

To change a binding between a MAC address and an IPv6 address:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
Description
A descriptive name of the binding for identification and management purposes.
The MAC address of the computer or device that is bound to the IP address.
The IPv6 address of the computer or device that is bound to the MAC address.
To log the dropped packets, select Enable from the menu. The default setting is
Disable.
Protect Your Network
322