NETGEAR ProSafe FVS336Gv2 Reference Manual page 53

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Configure the protocol binding settings as described in the following table.
Setting Description
Service From the menu, select a service or application to be covered by this rule. If the service or
application does not appear in the list, you must define it (see
Services
Local Gateway From the menu, select a WAN interface.
Source Network The source network settings determine which computers on your network are covered by
this rule. Select an option from the Source Network menu:
• Any. All devices on your LAN.
•
• Address Range. In the Start IP field and End IP field, enter the IP addresses for the
•
Destination The destination network settings determine which Internet locations (based on their IP
Network addresses) are covered by the rule. Select an option from the Destination Network
menu:
• Any. All Internet IP addresses.
•
• Address Range. In the Start IP field and End IP field, enter the IP addresses for the
•
9. Click the Apply button.
on page 280).
Single Address. In the Start IP field, enter the IP address to which the rule is
applied.
range to which the rule is applied.
GROUP1-GROUP8 or a group name. The rule is applied to the selected group. The
group can be a LAN group or an IP LAN group.
For information about LAN groups, see
page 132. The Destination Network menu displays only IP LAN group names that
you added. If you did not add any IP LAN groups, the menu does not display IP LAN
groups. For information about IP groups, see
page 288.
Single Address. In the Start IP field, enter the IP address to which the rule is
applied.
range to which the rule is applied.
Group name. The rule is applied to the selected IP WAN group.
The Destination Network menu displays only IP WAN group names that you added.
If you did not add any IP WAN groups, the menu does not display IP WAN groups. For
information about IP groups, see
Configure the IPv4 Internet and WAN Settings
53
Manage Customized
Manage IPv4 LAN Groups and Hosts
Manage IP Address Groups
Manage IP Address Groups
on
on
on page 288.