NETGEAR ProSafe FVS336Gv2 Reference Manual page 143

Prosafe dual wan gigabit ssl vpn firewall

Hide thumbs Also See for ProSafe FVS336Gv2:

Table of Contents

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Enter the settings as described in the following table.

DMZ Port Setup

Select the Yes radio button to configure the DMZ port settings. Complete the following fields:

IP Address. Enter the IP address of the DMZ port. Make sure that the DMZ port IP address and LAN

port IP address are in different subnets (for example, an address outside the LAN DHCP address pool,

such as 192.168.1.101 when the LAN DHCP pool is 192.168.1.2–192.168.1.100). The default IP

address for the DMZ port 176.16.2.1.

Subnet Mask. Enter the IP subnet mask of the DMZ port. The subnet mask specifies the network

number portion of an IP address. The subnet mask for the DMZ port is 255.255.255.0.

By default, the DMZ port is disabled. After you configure the DMZ port, you can select the No radio

button to disable the DMZ port without losing the DMZ configuration.

Configure the IPv4 LAN Settings

Troubleshooting