NETGEAR ProSafe FVS336Gv2 Reference Manual page 597

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. Click the Status button that corresponds to the WAN interface for which you want to view
the status.
The following figure shows a static IP address configuration as an example.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table.
Item
Connection Time
Connection Type
Description
The period that the VPN firewall is connected through the WAN port.
The connection type can be either DHCP or Static IP.
Monitor System Access and Performance
595