Add Lan Wan Inbound Service Rules - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The following table lists the menus that apply to an IPv6 LAN WAN outbound rule.
Menus that apply to all IPv6 LAN WAN outbound
rules
Service
Action
LAN Users
WAN Users
Log
10. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
LAN WAN Rules screen.

Add LAN WAN Inbound Service Rules

By default, all inbound traffic (from the Internet to the LAN) is blocked. Allowing inbound
services opens potential security holes in your firewall. Enable only those ports that are
necessary for your network.
WARNING:
Make sure that you understand the consequences of a LAN WAN
inbound rule before you apply the rule. Incorrect configuration might
cause serious connection problems. If you are configuring the VPN
firewall from a remote connection, you might be locked out.
WARNING:
Make sure that you first configure the IPv4 WAN routing mode (see
Manage the IPv4 WAN Routing Mode
configure custom firewall rules. If you change the IPv4 WAN routing
mode, all LAN WAN inbound rules revert to default settings.
The following sections provide information about adding LAN WAN inbound service rules:
• Add an IPv4 LAN WAN Inbound Rule
• Add an IPv6 LAN WAN Inbound Rule
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
QoS Priority
on page 30) before you
Customize Firewall Protection
228
This menu is available only when the selection