NETGEAR ProSafe FVS336Gv2 Reference Manual page 168

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table.
Setting
IPv6 LAN Setup
IPv6 Address
IPv6 Prefix Length
DHCPv6
DHCP Status
DHCP Mode
Domain Name
Description
Enter the LAN IPv6 address. The default address is fc00::1. (For more information,
see IPv6 LANs on page 153.)
Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length is 64.
Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the DHCP
Status menu.
The default menu selection is Disable DHCPv6 Server.
From the DHCP Mode menu, select Stateful.
The IPv6 clients obtain an interface IP address, configuration information such as
DNS server information, and other parameters from the DHCPv6 server. The IP
address is a dynamic address.
For stateful DHCPv6, you must add one or more IPv6 address pools (see
IPv6 LAN Address Pool on page 168).
Note: If you select Stateful from the DHCP Mode menu, the Prefix Delegation
check box is disabled.
Enter the domain name of the DHCP server.
Configure the IPv6 LAN Settings
167
Add an