NETGEAR ProSafe FVS336Gv2 Reference Manual page 163

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
DHCPv6
DHCP Status
DHCP Mode
Prefix Delegation
Domain Name
Server Preference
DNS Servers
Lease/Rebind Time Enter the period after which the DHCP lease is renewed with the original DHCP
10. Click the Apply button.
Your settings are saved.
Description
Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the DHCP
Status menu.
The default menu selection is Disable DHCPv6 Server.
From the DHCP Mode menu, select Stateless.
The IPv6 clients generate their own IP address by using a combination of locally
available information and router advertisements but receive DNS server information
from the DHCPv6 server.
When you enable the stateless DHCP server for the LAN, you must also enable and
configure the RADVD for the LAN. For more information, see
Router Advertisement Daemon for the LAN
Select the Prefix Delegation check box. By default, prefix delegation is disabled in
the LAN.
When you enable prefix delegation, the stateless DHCPv6 server assigns prefixes to
its IPv6 LAN clients. For information about adding more prefixes, see
IPv6 LAN Prefixes for Prefix Delegation
Enter the domain name of the DHCP server.
Enter the DHCP server preference value. The possible values are 0–255, with 255 as
the default setting.
This is an optional setting that specifies the server's preference value in a server
advertise message. The client selects the server with the highest preference value as
the preferred server.
From the DNS Server menu, select a DNS server option:
• Use DNS Proxy. The VPN firewall acts as a proxy for all DNS requests and
communicates with the ISP DNS servers that you configure. For information
about specifying the ISP DNS servers, see
Internet Connection on page 94.
• Use DNS from ISP. The VPN firewall uses the ISP DNS servers that you
configure. For information about specifying the ISP DNS servers, see
Configure a Static IPv6 Internet Connection
• Use below. When you select this option, the Primary DNS Server and
Secondary DNS Server fields become available for you to enter IP addresses:
- Primary DNS Server. Enter the IP address of the primary DNS server for the
LAN.
- Secondary DNS Server. Enter the IP address of the secondary DNS server for
the LAN.
server or rebound with another DHCP server to extend the existing DHCP lease. The
default period is 86400 seconds (24 hours).
Configure the IPv6 LAN Settings
162
Manage the IPv6
on page 171.
on page 163.
Manually Configure a Static IPv6
on page 94.
Manually Add
Manually