NETGEAR ProSafe FVS336Gv2 Reference Manual page 472

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > SSL VPN > Resources.
The Resources screen displays.
7. In the List of Resources table, click the Edit button for the new resource.
The Edit Resources screen displays the IPv4 settings. The following figure shows some
examples.
8. To configure the settings for an IPv6 resource instead of an IPv4 resource, in the upper
right, select the IPv6 radio button.
The Edit Resources screen displays the IPv6 settings. Except for the Prefix Length field,
which is the Mask Length field on the screen for IPv4, the IPv6 screen is identical to the
IPv4 screen.
9. Enter the settings as described in the following table.
Setting
Add Resource Addresses
Resource Name
Service
Set Up Virtual Private Networking with SSL Connections
Description
The unique identifier for the resource. This is the resource name that you
created on the Resources screen.
The SSL service that you assigned to the resource on the Resources screen.
470