ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9.
Enter the settings as described in the following table.
Setting
Service
Action
Select Schedule
DMZ Users
WAN Users
Log
QoS Priority
10.
Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
DMZ WAN Rules screen.
Configure Other Firewall Features
The following sections provide information about other firewall features:
•
Manage Protection Against Common Network Attacks
•
Manage VPN Pass-Through
Description
From the menu, select FTP.
From the menu, select ALLOW by schedule, otherwise block.
From the menu, select a schedule.
For information about how to configure schedules, see
page 292.
From the menu, select Address Range.
In the Start and Finish fields, specify the DMZ IPv6 address range for the users that
are allowed to access the FTP server.
From the menu, select Single Address.
In the Start field, enter the WAN IPv6 address of the FTP server on the Internet.
You can leave the selection from the menu at Never.
From the menu, select Maximize-Throughput.
For more information about QoS priorities for IPv6 traffic, see
Service Priorities for IPv6 Firewall Rules
Customize Firewall Protection
265
Define a Schedule
Default Quality of
on page 298.
on