NETGEAR ProSafe FVS336Gv2 Reference Manual page 125

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Inter VLAN Routing
Enable Inter VLAN
Routing
9. Click the Apply button.
Your settings are saved.
Change a VLAN Profile
The following procedure describes how to change an existing VLAN profile.

To change a VLAN profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4
settings.
7. In the VLAN profiles table, click the Edit button for the VLAN profile that you want to
change.
The Edit VLAN Profile screen displays.
8. Change the settings.
For information about the settings, see
Description
This setting is optional. To ensure that traffic is routed only to VLANs for which
inter-VLAN routing is enabled, select the Enable Inter VLAN Routing check box.
This feature is disabled by default. When you clear the Enable Inter VLAN
Routing check box, traffic from this VLAN is not routed to other VLANs, and traffic
from other VLANs is not routed to this VLAN.
Add a VLAN Profile
Configure the IPv4 LAN Settings
124
on page 120.