NETGEAR ProSafe FVS336Gv2 Reference Manual page 443

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > SSL VPN > Portal Layouts.
The Portal Layouts screen displays the IPv4 portals.
7. To access an IPv6 portal instead of an IPv4 portal, in the upper right select the IPv6 radio
button.
The Portal Layouts screen displays the IPv6 portals.
8. In the Portal URL column of the List of Layouts table, click the URL for a portal.
You can recognize a portal through the portal layout name with which a URL ends.
Note: This URL is the link that you must provide to a user who needs access
to the portal. The user must enter this URL in the navigation toolbar of
a browser. For you to enable a user outside the VPN firewall's local
network to access the portal, the URL must have a public IP address.
The login screen displays.
Set Up Virtual Private Networking with SSL Connections
441