NETGEAR ProSafe FVS336Gv2 Reference Manual page 547

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Authentication Password
Privacy Algorithm
Privacy Password
9. Click the Apply button.
Your settings are saved. If you changed the security level, the new level displays in the
SNMPv3 User table on the SNMP screen.
Configure the SNMP System Information
The following procedure describes how to configure the SNMP system information.

To configure the SNMP system information:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Administration > SNMP.
The SNMP screen displays.
7. Click the SNMP System Info option arrow in the upper right.
The SNMP SysConfiguration screen displays.
Description
The authentication password that an SNMPv3 user must enter to be granted
access to the SNMP agent that collects the MIB objects from the VPN firewall.
From the menu, select the encryption method for the communication between
an SNMPv3 user and the SNMP agent that collects the MIB objects from the
VPN firewall:
• DES. Data Encryption Standard.
• AES. Advanced Encryption Standard.
The privacy password that an SNMPv3 user must enter to allow decryption of
the MIB objects that the SNMP agent collects from the VPN firewall.
Optimize Performance and Manage Your System
545