NETGEAR ProSafe FVS336Gv2 Reference Manual page 297

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table.
Setting
Profile Name
Re-Mark
QoS Priority
9. Click the Apply button.
Your settings are saved. The new QoS profile is added to the List of QoS Profiles table.
Change an IPv4 QoS Profile
The following procedure describes how to change an existing IPv4 QoS profile.

To change an IPv4 QoS profile:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
Description
A descriptive name of the QoS profile for identification and management purposes.
Select the Re-Mark check box to set the Differentiated Services (DiffServ) mark in the
Type of Service (ToS) byte of an IP header by specifying the QoS type (IP precedence
or DHCP) and QoS value.
Make a selection from the QoS menu and enter a value in the QoS Value field:
• QoS. Select a traffic classification method:
- IP Precedence. A legacy method that sets the priority in the ToS byte of an IP
header.
- DSCP. A method that sets the Differentiated Services Code Point (DSCP) in the
Differentiated Services (DS) field (which is the same as the ToS byte) of an IP
header.
• QoS Value. Enter the QoS value that the VPN firewall must compare against the
QoS value in the ToS or DiffServ byte of an IP header. The QoS value that you
must enter depends on your selection from the QoS menu:
- For IP Precedence, select a value from 0 to 7.
- For DSCP, select a value from 1 to 63.
If you clear the Re-Mark check box (which is the default setting), the QoS profile is
specified only by the QoS priority.
The QoS priority represents the classification level of the packet among the priority
queues within the VPN firewall. If you select Default, packets are mapped based on
the ToS bits in their IP headers.
From the QoS Priority menu, select a priority queue:
• Default
• High
• Medium High
• Medium
• Low
Customize Firewall Protection
296