NETGEAR ProSafe FVS336Gv2 Reference Manual page 353

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
5. Specify the following VPN tunnel parameters:
• IP or DNS public (external) address of the remote equipment. Enter the remote IP
address or DNS name of the VPN firewall. For example, enter 192.168.15.175.
• Preshared key. Enter the pre-shared key that you already specified on the VPN
firewall. For example, enter I7!KL39dFG_8.
• IP private (internal) address of the remote network. Enter the remote private IP
address of the VPN firewall. For example, enter 192.168.1.0. This IP address enables
communication with the entire 192.168.1.x subnet.
6. Click the Next button.
The Configuration Summary screen displays a summary of the new VPN configuration.
7. Click the Finish button.
The Configuration Panel screen displays.
8. Specify the local and remote IDs:
Set Up Virtual Private Networking With IPSec Connections
351