Change A Secondary Lan Ipv6 Address - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. In the Add Secondary LAN IP Address section, enter the following settings:
• IPv6 Address. Enter the secondary address that you want to assign to the LAN ports.
• Prefix Length. Enter the prefix length for the secondary IP address.
9. Click the Add button.
The secondary IP address is added to the Available Secondary LAN IPs table.
10. Repeat Step 8
Available Secondary LAN IPs table.
Note: You cannot configure secondary IP addresses in the DHCP server.
The hosts on the secondary subnets must be manually configured
with the IP addresses, gateway IP address, and DNS server IP
addresses.

Change a Secondary LAN IPv6 Address

The following procedure describes how to change an existing secondary LAN IPv6 address.

To change a secondary LAN IPv6 address:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings > LAN Multi-homing.
The LAN Multi-homing screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The LAN Multi-homing screen displays the IPv6 settings.
and Step 9 for each secondary IP address that you want to add to the
Configure the IPv6 LAN Settings
182