Capture Packets In Real Time - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

To display the routing table:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Monitoring > Diagnostics.
The Diagnostics screen displays the IPv4 settings.
7. To display the IPv6 routing table instead of the IPv4 routing table, in the upper right, select
the IPv6 radio button.
The Diagnostics screen displays the IPv6 settings.
8. In the Router Options section, click the Display button.
The Route Display pop-up screen displays the routing table.

Capture Packets in Real Time

Capturing packets can assist NETGEAR technical support in diagnosing packet transfer
problems. You can also use a traffic analyzer to do your own problem diagnoses.

To capture and download packets in real time:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
Diagnostics and Troubleshooting
609