Remove One Or More Lan Traffic Meter Accounts - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For more information about the settings, see
LAN IPv4 Address Account
11. Click the Apply button.
Your settings are saved. The modified account displays in the LAN Traffic Meter Table on
the LAN Traffic Meter screen.

Remove One or More LAN Traffic Meter Accounts

The following procedure describes how to remove one or more LAN IPv4 address accounts
that you no longer need for the LAN traffic meter.

To remove one or more LAN IPv4 address accounts:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display, with the LAN Setup screen in view.
7. Click the Advanced option arrow in the upper right.
The IPv4 LAN Advanced screen displays.
8. Click the LAN Traffic Meter tab.
The LAN Traffic Meter screen displays.
9. In the LAN Traffic Meter Table, select the check box to the left of the accounts that you want
to remove or click the Select All button to select all accounts.
10. Click the Delete button.
The selected accounts are removed from the LAN Traffic Meter Table.
Configure and Enable the Traffic Meter for a
on page 561.
Monitor System Access and Performance
566